What perylene pigments are
Perylene reds are polycyclic organic pigments built on the perylene-3,4,9,10-tetracarboxylic diimide core. The chemistry descends from vat dyes, which were first synthesized for textile use in the early twentieth century. That lineage matters. Molecules with low solubility resist bleeding into binders and solvents, so the color stays where it is dispersed.
Three grades dominate industrial selection: Pigment Red 149, Pigment Red 178, and Pigment Red 179. All three appear in our organic pigments catalog, and all three carry a bluish to slightly yellowish red tone that holds up outdoors. Formulators working on automotive refinishing and industrial maintenance coatings typically reach for this family when weather fastness and transparency carry real weight, accepting a higher price band than classical azo reds.
The measured numbers
Values below come from the site-measured table on the catalog page linked above. Heat stability is recorded in degrees Celsius, light fastness on the blue wool scale, and migration at 0.1% in soft PVC.
| Pigment | Heat °C | Light fastness | Migration FS 0.1% | PVC | PE/PP | PS | PET | PP fibers | PA fibers |
| PR149 | 280 | 8 | 5 | ● | ● | ○ | ○ | ● | ● |
| PR178 | 300 | 8 | 5 | ● | ● | ● | ● | ● | ○ |
| PR179 | 300 | 8 | 5 | ● | ● | ● | ○ | ○ | ○ |
Read the ceiling first. 300°C is where the measurement scale tops out, and PR178 and PR179 both sit there; PR149 measures 280°C. A blue wool rating of 8 is the top step of that scale. Migration class 5 means no visible bleed at the 0.1% loading. For context on what these thresholds mean across chemistries, see the organic pigment heat stability guide.
Working with a specialized supplier shortens the path from these numbers to a filled batch. Ningbo Ultra Color Co., Ltd supplies perylene reds alongside solvent dyes, inorganic and effect pigments, and additives, with REACH and RoHS compliance checks and retention samples kept for five years.
Choosing among the three
Pigment Red 149 for fibers
PR149 is the fiber grade of the group. It is the only one of the three carrying a full recommendation for polyamide fibers, and it also holds that rating for PP fibers. The trade-off is the 280°C heat stability, 20 degrees below its two siblings. Spin-dyeing polyamide runs well inside that window, so the gap rarely blocks approval.
Pigment Red 178 for engineering resins
PR178 stands out in the resin matrix. It is the only perylene in the table with a full PET recommendation, PS stays fully recommended as well, and it keeps solid ratings in PVC, PE/PP, and PP fibers. At 300°C it covers injection molding of engineering blends where PR149 would need retesting.
Pigment Red 179 for coatings
PR179 is the coatings workhorse. The table shows it dropping to limited ratings across all three fiber columns, which matters little to a paint formulator. Its 300°C heat stability clears coil coating and powder cure schedules, and the maroon-shade transparency that made it a favorite in automotive basecoats carries over to industrial finishes.
Against DPP and quinacridone reds
The headline numbers tie. PR254 (DPP) and PR202 (quinacridone) both measure 300°C with light fastness 8 and migration 5, exactly matching PR178 and PR179. The differences sit in the resin columns, where DPP red PR254 draws “not recommended” for both PET and PC while the perylenes stay usable. Cost runs the other way: DPP reds are commonly cheaper for a given masstone. When the decision hinges on this trade, the DPP pigment comparison lays out the competing matrix in the same format. Outdoor gloss retention, a traditional perylene strength, typically decides it in favor of this family for refinishing lines.
FAQ
Which perylene red works best in automotive basecoats?
PR179, in most cases. Its transparency supports the metallic sparkle effect that basecoat formulation targets, and its measured 300°C heat stability tolerates repair baking ovens. PR149 at 280°C remains usable where cure temperatures stay lower.
Why do perylene pigments cost more than azo reds?
Synthesis is part of the answer. The perylene core needs multi-step condensation chemistry, while azo reds couple diazonium salts in one step. Performance is the other part: light fastness 8 and migration class 5 in the same pigment are rare at azo prices.
Can PR149 replace PR178 in PET packaging inks?
The measured table argues against it. PR178 carries a full PET recommendation; PR149 rates only usable with limits there. Retesting the full ink system could change the answer for a specific formula, but the starting position favors PR178.


