Phthalocyanine blue PB15 is the default blue of the color industry: one copper phthalocyanine chemistry, five commercial grades. Any buyer scanning an organic pigment catalog meets the suffixes at once. PB15:0, 15:1, 15:2, 15:3, and 15:4 differ in crystal form, shade, and process tolerance. The suffix is the whole story.
Why One Pigment Splits Into Five Grades
Copper phthalocyanine packs into more than one crystal lattice, and two lattices dominate commerce. Alpha is a reddish blue phase that never quite sits still. Beta is the stable, greenish blue phase. A third arrangement, epsilon, appears in specialty material. On top of the lattice itself, producers apply two engineering treatments: crystal stabilization against phase conversion, and flocculation control against particle clustering. Five suffixes fall out of that matrix. PB15:0 is unstabilized alpha, PB15:1 stabilized alpha, PB15:2 stabilized alpha with anti-flocculation treatment, PB15:3 the beta form, and PB15:4 a flocculation-controlled grade that suppliers commonly class as epsilon-type.
Unstabilized alpha has a known weakness. Heat it hard or hold it long in solvent, and PB15:0 creeps toward the beta lattice, taking its shade along. That is one reason catalog data measures PB15:0 at 220°C heat stability while every stabilized grade holds 300°C.
The Five Grades, Measured Side by Side
The values below come from the measured product data in our organic pigment catalog: heat stability in °C, light fastness on the 1–8 scale, migration fastness at 0.1% loading, and the typical industry classification of each crystal form.
| Grade | Crystal form (typical) | Heat stability (°C) | Light fastness (1–8) | Migration FS 0.1% | Resin suitability (12 columns) |
|---|---|---|---|---|---|
| PB15:0 | alpha, unstabilized | 220 | 8 | 5 | PVC, PE/PP, rubber; limited in PUR |
| PB15:1 | alpha, stabilized | 300 | 8 | 5 | suitable in all 12 columns |
| PB15:2 | alpha, stabilized, anti-flocculating | 300 | 8 | 5 | suitable in 9 columns, not PP/PET/PA fibers |
| PB15:3 | beta | 300 | 8 | 5 | suitable in all 12 columns |
| PB15:4 | epsilon-type, anti-flocculating | 300 | 8 | 5 | suitable in 9 columns, not PP/PET/PA fibers |
Three things stand out. Light fastness is 8 across the board and migration fastness a uniform 5, so permanence never decides this choice. Heat is where PB15:0 separates itself, 80°C below the rest. The resin columns carry the procurement story: 15:1 and 15:3 hold suitability marks through all twelve application columns, while 15:2 and 15:4 drop out of polypropylene, PET, and polyamide fiber spinning.
The alpha grades: PB15:0, 15:1, 15:2
PB15:0 gives the reddest, cleanest blue of the family at the lowest price, which is why it survives in PVC, polyolefins, and rubber despite the 220°C ceiling. PB15:1 keeps that shade direction with the crystal locked, buying 80°C of extra heat headroom and a far wider resin window. PB15:2 adds flocculation control. In coatings and inks, where fine particles can cluster and bleed tint strength, that treatment pays for itself, typically at a premium over 15:1.
The beta and epsilon grades: PB15:3 and 15:4
PB15:3 is the volume workhorse: beta crystal, greenish shade, and usually the most economical phthalo blue per kilogram. PB15:4 matches that greenish direction with anti-flocculation treatment for systems where gloss and rub-out behavior matter. Both measure 300°C and light fastness 8. The advantage of 15:4 over 15:3 is colloidal stability, not fastness.
How to Match a Grade to Your Resin
Start from processing temperature. Melt processing above roughly 220°C, as in PET, PA6, or PC, rules out PB15:0 at step one. Next check the suitability marks for your polymer in the tabulated data. Then ask whether the system actually flocculates. Solvent-borne coatings and offset inks usually justify paying for PB15:2 or 15:4; masterbatch for commodity plastics rarely does. And remember that PB15 works as dispersed particles, never as dissolved molecules, the same line that separates pigments from dyes in paint. Dispersion quality is the property you are buying.
FAQ
Which PB15 grade handles the highest processing temperature?
PB15:1, 15:2, 15:3, and 15:4 all measure 300°C heat stability in catalog data. PB15:0 is the outlier at 220°C, which keeps it in PVC, polyolefin, and rubber work rather than engineering plastics.
Do the five grades differ in light fastness?
No. All five carry light fastness 8, the top of the 1–8 scale, and migration fastness 5 at 0.1% loading. Shade, heat stability, and dispersion behavior are what separate them.
Can phthalocyanine blue PB15 color PP or PET fibers?
Two grades can. PB15:1 and PB15:3 carry suitability marks for PP, PET, and PA fibers in the tabulated resin data; PB15:2 and 15:4 are marked unsuitable for fibers even with their anti-flocculation treatment.
From our catalog
Ningbo Ultra Color stocks phthalocyanine blue PB15 grade by grade, from alpha red-shade PB15:0 through stabilized 15:1 and 15:2 to beta green-shade 15:3 and epsilon-type 15:4. Every lot is checked against REACH and RoHS requirements, with reference samples retained for five years. Measured data for all five grades sits in the online catalog.


