Solvent Black 5, sold for well over a century as nigrosine, is the dye formulators reach for when black must stay transparent. Carbon black hides what is underneath. Nigrosine dissolves into the material and tints it through, the way ink tints water.
That one property explains the applications: smoked-grey polystyrene, ebony wood stains, spirit-soluble stamping inks, toned lacquers. This article collects the measured values for the dye, checks them cell by cell, and adds the practical notes that datasheets tend to omit.
What Solvent Black 5 actually is
Nigrosine is an azine-family black, made by oxidizing aniline into deep, resinous condensation products. The chemistry is old: industrial aniline black goes back to the 1860s, and the nigrosine name has followed the product through more than a century of commerce. The Color Index designation is C.I. Solvent Black 5, and our product table lists it under the combined name Solvent Black 5 Nigrosine.
Two industrial forms exist. The spirit-soluble base dissolves in alcohols, ketones and aromatics, which suits inks and lacquers. Its water-soluble salt cousin serves textile and leather coloring instead. When ink makers and compounders say nigrosine, they mean the base, the form behind Solvent Black 5.
Site-measured performance
The values below come from the measured column of our solvent dyes catalog, row Solvent Black 5 Nigrosine. Symbols follow the site’s rating scale: ● suitable, ○ limited, × not recommended.
| Property or system | Rating for Solvent Black 5 |
|---|---|
| Heat stability (site-measured) | 250 °C |
| Light fastness (blue wool) | 5-6 |
| Oil and fat systems | ● |
| Paint | ● |
| Ink | ● |
| Polystyrene (PS) | ● |
| SB, ABS, SAN | ○ limited |
| PMMA, PC, PET, PA 6 | × not recommended |
Two numbers carry most of the weight. A heat stability of 250 °C covers polystyrene processing with margin to spare. Light fastness of 5-6 on the blue wool scale is respectable for a dye, enough for interior inks and stains but not for exterior exposure.
How nigrosine behaves in plastics
A pigment sits in the resin as dispersed particles and scatters light. A dye dissolves into the polymer and colors it from within; that is the whole pigment vs dye difference in one sentence. A nigrosine-black PS part therefore looks like smoked glass, while a carbon-black part reads flat and opaque.
Transparent black in polystyrene
PS is the one resin the table marks ● for this dye. Typical dosages run low, around 0.02 to 0.1 percent, because transparent smoke tints need restraint more than loading. Styrene-butadiene, ABS and SAN carry a ○: compatibility shifts with rubber content and processing aids, so a plaque trial comes before any production commitment. PMMA, PC, PET and PA 6 are marked × outright, and the dye’s 250 °C ceiling alone rules out the hotter engineering melts.
For those hotter resins the same catalog points elsewhere. Solvent Black 7, an azine rated at 290 °C, and Solvent Black 27, a melta-complex type rated at 280 °C, both clear PC and PET processing ranges. A wider read on what a solvent dye is used for across resin families saves trial time.
Deep transparent blacks are a dye problem rather than a pigment problem, and that is where Ningbo Ultra Color starts: solvent dyes, organic and inorganic pigments, effect pigments and additives, each batch checked against REACH and RoHS parameters in an in-house lab, with reference samples retained for five years.
Inks, coatings and wood stains
The ● marks for ink, paint and oil/fat systems trace straight to classic nigrosine outlets. Spirit-soluble nigrosine has anchored alcoholic marking inks, stamping inks and penetrating wood stains since before synthetic rivals existed. On pale timber it is still the cheapest route to an ebony effect, typically at 0.5 to 2 percent in the stain vehicle.
In coatings, nigrosine works as a toner. A fraction of dye added to a carbon black millbase pushes the masstone toward jet and deepens the undertone. Blue wool 5-6 supports interior lacquers, furniture stains and shoe creams; exterior acrylic systems are the wrong home for it.
What do buyers usually ask about Solvent Black 5?
Is Solvent Black 5 the same thing as nigrosine?
Yes. Nigrosine is the historical trade name and Solvent Black 5 the Color Index designation for the same spirit-soluble black. Suppliers who list “Solvent Black 5 Nigrosine” are simply covering both naming habits.
How hot can it go?
The site-measured heat stability is 250 °C. That clears polystyrene injection and extrusion comfortably. Engineering plastics run hotter, and for them the same table lists Solvent Black 7 at 290 °C and Solvent Black 27 at 280 °C.
Will it bloom or bleed in the finished part?
In resins marked ● the risk is low at sensible dosages. In the ○ resins, ABS and SAN included, migration depends on the grade, so the working rule is a plaque trial plus a heat-ageing check before release. Where the matrix is marked ×, no dosage fixes it; switch dye families.
Before committing a full order, run the dye through your own resin at lab scale. Nigrosine is cheap to test and unforgiving to assume.


