Quinacridone pigments hold the demanding end of the organic red and violet card. Two index numbers carry most of the volume: Pigment Red 122, the dimethyl quinacridone with a magenta shade, and Pigment Violet 19, the parent molecule whose crystal form decides whether it reads violet or bluish red. A third grade, PR202, sits beside them as the chloro-substituted deep red. All three post the same headline numbers in measured product data: 300°C heat stability, light fastness 8, migration fastness 5. The headline numbers tie. The real choice between these colorants plays out in the resin matrix.
One Molecule, Several Crystal Forms
The parent quinacridone is polymorphic. Its gamma lattice is the commercial red, the beta lattice leans maroon, and the alpha lattice is the violet that gave PV19 its index name. Producers steer the polymorph in the finishing step, so one base molecule ships as distinctly different colorants. Shade here is a lattice property, not a formula change.
PR122 keeps the quinacridone backbone and adds two methyl groups at the 2,9-positions, which pulls the shade toward the clean magenta that coating and ink formulators associate with the grade. PR202 substitutes chlorine at the same two positions and is commonly positioned as the most weatherfast of the three in automotive and industrial finishes. The tightly hydrogen-bonded lattice is the reason buyers pay for this family at all: exterior exposure that chalks most classical azo reds typically leaves a quinacridone intact. That durability, not any single grade, is what owns the high-performance red specifications.
The Measured Data for PR122, PV19 and PR202
The values below are taken from the measured organic pigment data tables: heat stability in °C, light fastness on the 1–8 scale, migration fastness at 0.1% loading, and suitability marks across twelve resin and application columns (● suitable, ○ limited, × unsuitable).
| Grade | Heat stability (°C) | Light fastness (1–8) | Migration FS 0.1% | Resin suitability, 12 columns |
|---|---|---|---|---|
| Pigment Red 122 | 300 | 8 | 5 | ● PVC, PE/PP, PS, ABS, rubber, PUR; ○ PP fibers; × PA6, PET, PC, PET fibers, PA fibers |
| Pigment Violet 19 | 300 | 8 | 5 | ● PVC, PE/PP, PS, rubber, PUR; ○ ABS, PET, PP fibers, PET fibers; × PA6, PC, PA fibers |
| Pigment Red 202 | 300 | 8 | 5 | ● eleven columns including PA6, PET and all three fiber columns; × PC |
Fastness never separates the three. The resin matrix does all the sorting. PR202 is the broadest, holding full marks through polyamide 6, PET and every fiber column. PR122 drops out of the three engineering resins and both PET and polyamide fiber spinning. PV19 lands between them, with limited marks in ABS, PET and two fiber columns. One cell is common to all three rows: polycarbonate carries a cross for the whole family in this data set, a reminder that even top-tier organic reds have their limits in engineering polymers.
Resin First, Shade Second
Selection starts in the matrix, not on the shade card. Processing windows up to 300°C keep all three candidates alive, so the first filter is the polymer: PA6 or PET parts point to PR202, polyolefin and PVC systems leave all three open, and polycarbonate calls for a different chemistry altogether. Fiber spinning is the sharpest divider, since only PR202 carries full suitability marks through PP, PET and PA fibers.
Shade settles what the matrix leaves open: magenta from PR122, violet to bluish red from the PV19 crystal forms, a deep bluish red from PR202. Price usually follows performance, and quinacridones typically trade well above BONA lake reds per kilogram. When the specification says interior or short-life, the PR48 family of BONA lake reds usually delivers the red at commodity cost. When the specification says exterior or automotive, the quinacridone line is where the search ends.
FAQ
Is quinacridone lightfast enough for exterior coatings?
Yes. All three grades measure light fastness 8, the top of the 1–8 scale, in the tabulated product data, and the family is commonly specified for automotive finishes and exterior industrial coatings where lower-cost azo reds lose gloss and shade.
Can PR122 color PA6, PET or PC?
Not in the measured matrix. PA6, PET and PC all carry unsuitable marks for PR122. PR202 covers PA6 and PET with full marks, while polycarbonate shows unsuitable for all three quinacridone grades in this data set.
What separates PR122 from PV19 chemically?
Two methyl groups. PV19 is the parent quinacridone, polymorphic between violet and red crystal forms, and PR122 is its 2,9-dimethyl derivative with a cleaner magenta shade. Their measured fastness line is identical: 300°C, light fastness 8, migration fastness 5.
Performance Reds Beside the Commodity Range
Ningbo Ultra Color stocks quinacridone PR122, PV19 and PR202 alongside its commodity reds, so one order can carry both the exterior grades and the everyday lake reds. Every lot is screened against REACH SVHC and RoHS limits, with batch samples retained for five years.


