Same chromophore, four metal salts

Four commercial pigments answer to one Colour Index number. Pigment Red 48:1, 48:2, 48:3 and 48:4 share constitution 15850: an azo red built on BONA (beta-oxynaphthoic acid) and precipitated as an insoluble metal salt, still sold under 2B red trade names. The chromophore fixes the color. The metal ion changes almost everything a formulator cares about: shade position, heat ceiling, light fastness, and how the grade behaves in each melt.

Barium, calcium, strontium and manganese are the four ions behind the suffixes 48:1 through 48:4. Because the finished pigment is an insoluble particle, it stays put where a dye would dissolve and wander — that particle-versus-molecule distinction is the core of the pigment and dye difference. What the metal salt adds is a set of trade-offs inside one color family, which is why a buyer who specifies “a PR 48 red” without the suffix often receives the wrong grade.

What the measured numbers say

The values below come from the measured table in our organic pigment catalog: heat stability in degrees Celsius, light fastness on the 1–8 blue wool scale, and migration rated 1–5 at 0.1% loading.

Grade Metal salt Heat stability Light fastness Migration (0.1%)
Pigment Red 48:1 Barium 240 °C 5–6 5
Pigment Red 48:2 Calcium 240 °C 5–6 5
Pigment Red 48:3 Strontium 250 °C 6 5
Pigment Red 48:4 Manganese 230 °C 5–6 5

Read the spread, not the rows. The strontium salt 48:3 tops the family at 250 °C with a blue wool 6. The manganese salt 48:4 sits at the other end at 230 °C, which rules it out of hotter polyolefin processes. Migration is a uniform 5, so within this family the choice turns on heat, light and resin fit rather than bleed resistance.

Where each grade earns its place

The resin matrix in the same table gives all four grades solid marks in PVC, PE/PP, rubber and polyurethane, and no marks at all in PA6, PET or PC. The differences sit in between, across the application industries that dominate PR 48 demand.

Pigment Red 48:1 (barium)

The workhorse of flexible PVC and rubber. Its 240 °C ceiling covers calendering and extrusion of plasticized compounds. Marks in PS and ABS are conditional, so keep it at the soft, low-temperature end of the matrix.

Pigment Red 48:2 (calcium)

The broadest reach in the family: solid marks in PS and PP fibers on top of the PVC and polyolefin base, at the same 240 °C. Commonly the bluest and brightest shade of the four, and the default red in many ink systems.

Pigment Red 48:3 (strontium)

Best heat stability and light fastness of the four: 250 °C and blue wool 6, with a solid PP fiber mark. The pick when a polyolefin process runs hot or the part faces longer indoor exposure.

Pigment Red 48:4 (manganese)

The narrowest fit. At 230 °C, with solid marks only in the PVC, PE/PP, rubber and PUR columns, it earns its keep where its shade depth is specifically wanted — verify the resin fit before committing a line to it.

Frequently asked questions

Which Pigment Red 48 grade suits flexible PVC best?
For general-purpose flexible PVC and rubber, 48:1 is the economical starting point, and all four grades hold solid PVC marks in our table. Move to 48:3 when light exposure matters; its blue wool 6 is a step above the 5–6 of the other three.

Is the barium in Pigment Red 48:1 a compliance problem?
Barium is a heavy metal, so toy and packaging specifiers commonly steer toward the calcium salt 48:2 where limits are strict. Compliance is verified per lot, not per grade: request REACH SVHC screening and RoHS documents against the delivered batch, plus EN 71-3 or AP(89)-1 statements wherever the application claims them.

Can Pigment Red 48 grades color PA6, PET or PC?
No. The measured matrix marks all four grades zero for polyamide, PET and polycarbonate, and the 230–250 °C family ceiling is below what those melts demand. For engineering resins, quinacridone and azo condensation reds such as PR 122 and PR 144 run at 300 °C with light fastness 7–8 in the same catalog table.

From our catalog

Ningbo Ultra Color stocks the Pigment Red 48 family as four separate grades, each carrying its own spec sheet, lot COA and compliance file covering REACH SVHC and RoHS screening. Batch samples are retained for five years, so any shipment can be re-verified long after delivery. The measured values quoted above come from the same catalog data.

Scroll to Top