Solvent Red 24 and Solvent Red 27 up close

Solvent Red 24 and Solvent Red 27 sit three numbers apart in the solvent red series, and both land on the shortlist when a transparent plastic part needs a strong, clean red. Both are disazo solvent dyes. Both carry familiar synonyms: Solvent Red 24 is commonly listed as Sudan IV, constitution number C.I. 26105, while Solvent Red 27 appears in most references as Oil Red O, C.I. 26125. The names sit close together. The processing windows do not, and that gap is where the choice gets made.

The measured numbers side by side

Generic talk about azo reds only goes so far. The solvent dye catalog publishes a measured suitability table covering 72 Color Index grades, and the two rows read as follows.

Property (catalog-measured) Solvent Red 24 Solvent Red 27
Chemical class Disazo Disazo
Heat stability 260 °C 250 °C
Light fastness, blue wool scale 5–6 6–7
Oil and fat, paint, ink ● ●
PS ● ●
SB ● ○
ABS, SAN ○ ○
PMMA ○ ×
PC, PET, PA6 × ×

Marks follow the catalog matrix: a filled circle means suitable, an open circle means usable after evaluation in your own compound, a cross means not listed as suitable. Ten degrees of heat stability separate the two grades, and on the blue wool scale the order reverses. Neither row wins outright. Each answers a different processing question.

Which red for which job

Heat and the process window

PS molding typically runs between 180 and 250 °C. Both reds carry a solid mark in the PS column, but the arithmetic differs: at 250 °C heat stability, Solvent Red 27 sits at its rated ceiling at the top of that band, while Solvent Red 24 holds a ten-degree cushion. The cushion matters when residence time stretches, when color is let down through a masterbatch carrier compounded hot, or when regrind passes through the machine a second time. For SB the table is blunt: SR24 is marked suitable, SR27 conditional.

Light exposure in service

Solvent Red 27 measures 6–7 on the blue wool scale against 5–6 for Solvent Red 24. Measured, not marketed. When a red part lives near a window, under showroom lighting or behind glazing outdoors, that rating gap settles the order on its own, because a red that drifts toward dull brown reads as a quality failure in the finished product. SR24 answers the opposite brief: the higher heat ceiling plus the longer column of solid marks, SB included.

From our catalog

Ningbo Ultra Color supplies solvent dyes together with organic, inorganic and effect pigments and additives, so both reds above can be sourced against the same measured table. REACH SVHC and RoHS screening covers each lot, and batch samples are retained for five years, which lets any number in this comparison be rechecked against the lot that shipped.

When neither red makes the cut

Both rows go blank in the PC, PET and PA6 columns, so neither dye belongs in an engineering-resin hopper. The catalog answer there is anthraquinone chemistry: Solvent Red 52 measures 300 °C heat stability and 6–7 light fastness, with solid marks in every resin column from PS through PMMA and PC to PET and PA6. Anthraquinone reds typically cost more per kilogram than disazo types and often read slightly bluer in shade; whether that trade pays depends on the resin in the machine, not on the shade card. The method generalizes. It is the same measured-first walk taken with Solvent Black 5 nigrosine, and if the class itself is new ground, the primer on what a solvent dye is used for covers where solvent dyes fit at all.

Frequently asked questions

Is Solvent Red 24 the same dye as Sudan IV?
In naming, yes. Solvent Red 24 is the Color Index generic name and Sudan IV the trade synonym most listings carry, both pointing to constitution number C.I. 26105. Solvent Red 27 follows the same pattern as Oil Red O, C.I. 26125.

Can Solvent Red 24 or Solvent Red 27 color polycarbonate, PET or nylon?
Not per the measured table. Both grades carry a cross in the PC, PET and PA6 columns. Solvent Red 52, an anthraquinone measured at 300 °C with 6–7 light fastness, is the catalog red for those engineering resins.

Which of the two holds its red better in daylight?
Solvent Red 27. Its measured blue wool rating of 6–7 sits above the 5–6 recorded for Solvent Red 24, a gap that matters wherever parts see long light exposure.

Scroll to Top