Why solvent dyes, not pigments
A pigment is a particle. A solvent dye dissolves into the polymer melt at a molecular level, which is why it can color polystyrene to the look of tinted glass while a pigment at the same loading turns the same resin cloudy. For transparent or high-clarity shades in masterbatch, that single difference decides the colorant class before any brand or price enters the conversation.
Two further advantages matter at scale. Solvent dyes carry high tinting strength, so transparent shades often need less than 0.1% dye in the final product, which keeps the carrier load in the masterbatch low. And because there are no particles to disperse, you eliminate the speck and undispersed-aggregate failures that haunt pigment masterbatch lines.
The trade-off is migration. A dye that is soluble in your resin at processing temperature may also be soluble enough in the finished part, or in something it touches, to bleed over time. Grade selection and quality of synthesis decide this, which is one reason the cheapest dye on a data sheet is rarely the cheapest dye in production.
Start from the extrusion temperature, not the color
Every dye has a heat stability ceiling. Exceed it and the colorant partially decomposes in the barrel, shifting shade and leaving tarry residue on the die. Match the ceiling to the resin before you look at a color card: PS and ABS compounds typically process in the 200–260 °C range, while engineering resins run hotter, with polycarbonate at roughly 280–320 °C and PET around 280–310 °C.
The working rule we apply: the dye’s heat stability rating should sit at least 20 °C above your peak barrel temperature. The values below come from our own published solvent dye table, where ratings are measured in the resin rather than extrapolated.
| Product | Chemical class | Heat stability | Light fastness | Best-fit resins |
|---|---|---|---|---|
| Solvent Yellow 14 | Monoazo | 260 °C | 5–6 | PS, SB, ink systems |
| Solvent Red 24 | Disazo | 260 °C | 5–6 | PS, SB |
| Solvent Blue 35 | Anthraquinone | 280 °C | 5–7 | PS, SB, SAN, PMMA |
| Solvent Green 28 | Anthraquinone | 300 °C | 6–7 | Nearly the full matrix, PC and PET included |
| Solvent Orange 60 | Perinone | 300 °C | 6–7 | ABS, SAN, PMMA, PC, PET |
Read the pattern rather than the rows. The 260 °C monoazo and disazo yellows and reds are economical workhorses for commodity resins. The 280–300 °C anthraquinone and perinone grades are what you run when the part is PC, PET or anything with a hot barrel.
Resin chemistry sets the shortlist
Azo yellows and reds (Solvent Yellow 14, Solvent Red 24) hold well in PS and SB and keep unit cost down for packaging and stationery compounds. Anthraquinone chemistry — the blues, greens and violets — is the engineering-resin workhorse: strong marks across SAN, PMMA, PC and PET, with migration resistance that holds up in technical parts. For black, nigrosine (Solvent Black 5) delivers deep transparent blacks at 250 °C, which suits PS and general-purpose ABS but rules it out for PET.
Where does that leave polyolefins? PE and PP are nonpolar, and solvent dyes have limited solubility in them, so transparent polyolefin coloration usually moves to specific dye grades or back to pigments. Our compatibility matrix covers PS, SB, ABS, SAN, PMMA, PC, PET and PA6, and the marks in it are measured, not promised.
Light fastness is an end-use question
On the 1–8 blue wool scale, a 5–6 rating handles indoor exposure and retail shelving without visible fade. Ratings of 6–7 and above belong in applications that see prolonged light: automotive interiors, display housings, garden equipment. Solvent Green 28 and Solvent Orange 60 sit at 6–7, which is part of why they travel well into engineering resins.
One practical note: light fastness is depth-sensitive. The same dye rates higher in a deep shade than in a pale tint, so test at your actual letdown rather than quoting the data sheet number for a mass-tone panel.
Compliance gates the purchase
Before a dye enters your formulation, the paperwork has to clear the same bar as the chemistry. For most export programs that means REACH SVHC screening, RoHS heavy-metal limits (cadmium, lead, mercury, Cr6+), EN 71-3 migration limits if the part touches toys, and a food-contact statement wherever the application claims one. Ask for these documents against the delivered lot, not the grade in general.
That is how we run it internally: every incoming batch of raw material is tested, inputs are refined before synthesis, each chemical reaction step is controlled against a record, and batch samples are retained for five years so any shipment can be re-verified years later.
A working checklist
- Write down your peak barrel temperature and typical residence time.
- Shortlist dyes rated at least 20 °C above that peak.
- Cross-check the resin matrix: a solid mark is a direct fit, an open circle means run a trial first.
- Set a light fastness floor from the end use, not from the color target.
- Request COA and compliance documents for the specific lot.
- Run a letdown trial in your own carrier resin before committing the order.
Frequently asked questions
Can solvent dyes color PE or PP masterbatch?
Generally no. Solvent dyes perform in polar resins such as PS, ABS, SAN, PMMA, PC, PET and PA6. Transparent shades in polyolefins usually need dedicated grades or a switch of strategy, and pigments remain the default there.
What dosage is typical in a masterbatch?
Transparent shades commonly fall between 0.01% and 0.1% dye in the final product. Concentrate formulations typically carry 5–20% dye depending on shade depth and letdown ratio, so the numbers that matter are yours, not the averages.
How do I check migration before release?
Press a colored plaque against a white plaque of the same resin under light pressure at elevated temperature for a day, then inspect the white face for color transfer. A repeat with the finished-part surface against packaging material catches the failures a data sheet will not.
About Ningbo Ultra Color
Ningbo Ultra Color Co., Ltd is a pigment, dye and additive supplier based in the Ningbo Free Trade Zone, China, serving plastics, ink, paint and textile manufacturers for more than twenty years. The portfolio spans solvent and disperse dyestuffs, organic and inorganic pigments, effect pigments and polymer additives, backed by an in-house laboratory that tests every batch. Compliance documentation — REACH SVHC, RoHS, EN 71-3, AP(89)-1 and OEKO-TEX Standard 100 — is available on request. Browse the full solvent dye table, see how colorants map to each application industry, or read our earlier primer on the difference between pigments and dyes.


