Color is a chemical delivery system. Under REACH, the European Union’s regulation on chemicals, the substances inside that delivery system carry duties that stretch from the pigment reactor to the finished plastic part. This guide sets out what REACH SVHC compliance means for colorants: how the mechanism works, which chemistries it touches, and what evidence a buyer should hold before signing a purchase order.

What the REACH SVHC candidate list actually regulates

REACH is Regulation (EC) No 1907/2006. Its SVHC mechanism runs through a candidate list of Substances of Very High Concern, maintained by ECHA, the European Chemicals Agency in Helsinki. The list grows several times a year. Inclusion is not a ban. It triggers duties that start at a concentration of 0.1% weight by weight.

Once a colorant, masterbatch, or finished article contains a listed substance above 0.1% w/w, EU suppliers must pass sufficient information down the chain, and consumers can request the same information. Article 33 of REACH expects an answer within 45 days. A buyer who imports articles directly into the EU inherits the duty personally. That is why SVHC status belongs in every colorant purchase file, not only for pigments with obvious heavy-metal chemistry.

Colorant entries that show up on the list

A few chemistry families matter most to color buyers. Lead chromate yellow, C.I. Pigment Yellow 34, and the lead chromate molybdate red, C.I. Pigment Red 104, have appeared as candidate-list entries because of their lead and hexavalent chromium content. Cadmium pigments face separate REACH Annex XVII restrictions that limit their use in many plastics. Chromium trioxide, used in passivation and surface treatment, sits on the authorisation list, Annex XIV.

Synthetic organic colorants are not automatically outside the story. Azo synthesis routes can leave trace aromatic amines, so screening reports for both pigments and solvent dyes commonly cover restricted amines alongside heavy metals. Buyers moving away from molybdate red often switch to DPP reds such as PO73 and PR254, which hold comparable chroma with no lead or chrome. For black shades, Solvent Black 5 nigrosine is a spirit-soluble dye that still needs the same impurity screen as any azo-derived product. The dye and pigment families are mapped across the full product range.

Six RoHS substances, one table

Colorants destined for electrical or electronic articles add a second layer: the EU directive on the restriction of hazardous substances, RoHS. It caps six substances in homogeneous materials. Masterbatch for TV housings, connectors, or cable sheathing has to respect every row of this table.

Substance RoHS limit in homogeneous material Colorant relevance
Cadmium (Cd) 0.01% (100 mg/kg) Cadmium yellows and reds; stabilizer traces
Lead (Pb) 0.1% (1000 mg/kg) Lead chromate pigments; dryer residues
Mercury (Hg) 0.1% (1000 mg/kg) Rare catalyst residue in legacy processes
Hexavalent chromium (Cr6+) 0.1% (1000 mg/kg) Chromate pigments and passivation layers
PBB and PBDE 0.1% (1000 mg/kg) each Flame retardants, not colorants, but batch screens include them

A pigment can sit below REACH communication thresholds and still fail RoHS when metal content crosses these caps. The two frameworks answer different questions. Both need numbers behind them.

How to verify a supplier’s SVHC claims

Ask for documents, not assurances. Four checks catch most weak paperwork. First, match the report to the lot: a generic certificate proves nothing, and the batch number on the report must equal the number printed on the drum or bag. Second, set the issue date against the latest candidate-list revision. ECHA updated the list several times in the past year, so an older report should at least name the list version it was screened against. Third, read the method and the detection limit. ICP-MS or GC-MS results in mg/kg with a stated limit of quantification show measurement; the bare word “compliant” shows nothing. Fourth, ask about retained samples. If a dispute surfaces months after delivery, a supplier holding a sealed sample of your lot can re-test it and settle the matter.

Keep the standard blunt: numbers, methods, dates, or the report goes back.

What should buyers ask about REACH SVHC and colorants?

Is a colorant that contains an SVHC above 0.1% banned in the EU?

No. Candidate-list inclusion creates information and notification duties, not a prohibition. A ban would require a separate restriction decision or a move to the authorisation list. What the buyer needs is a working disclosure chain, so the 0.1% information travels with the goods.

How often does the candidate list change?

Several times a year, in practice. Each ECHA update can add entries that touch pigments, dyes, or their impurity profiles. Re-checking supplier declarations after every update is the safe habit, and it takes minutes when reports carry list-version dates.

Do pigments and dyes need REACH registration themselves?

Generally yes, when a substance is manufactured in or imported into the EU above one tonne per year. Colorants purchased as preparations inherit duties through their components. Ask whether the specific dye or pigment holds a registration number, and who the registrant is.

Ningbo Ultra Color builds its colorant compliance on batch evidence. Every batch is checked against the updated REACH SVHC list and screened for the six RoHS substances under the program described on its about page. The QC laboratory tests each batch of raw material, and retained samples are kept for five years, so any shipment can be re-examined.

Scroll to Top