What Solvent Yellow 14 is

Solvent Yellow 14 is a monoazo dye, Colour Index 12055, CAS 842-07-9. The older literature calls the same molecule Sudan I, a name that still decides where the dye may legally be used. As a colorant it is an oil-soluble powder with a bright orange-yellow shade and high tinting strength, the kind of dye that carries a full transparent shade at a fraction of a percent of loading.

It dissolves in the polymer melt instead of dispersing in it. No particles, no haze. That single property separates solvent dyes from pigments in transparent work, and it is why the two colorant classes answer different formulation questions, a distinction we unpack in our comparison of pigments and dyes.

Heat stability tops out at 260 °C

Our published table rates Solvent Yellow 14 at 260 °C heat stability. Polystyrene compounds typically process between 200 and 260 °C, so the dye fits the barrel it was bought for. Polycarbonate, at roughly 280–320 °C, and PET, around 280–310 °C, do not. The rating is crossed out for both in the compatibility matrix, and no amount of processing care changes that chemistry.

The working margin we apply is 20 °C. If the peak barrel temperature sits within 20 °C of a dye’s rated ceiling, move up a grade. For yellow shades in engineering resins that usually means an anthraquinone type such as Solvent Yellow 33, rated 290 °C in the same table.

Resin compatibility, read cell by cell

The dye’s row marks PS, SB and SAN as direct fits, PMMA as a trial-first resin, and ABS, PC, PET and PA 6 as not recommended. Two details deserve a closer look. ABS is crossed out for this grade while the neighbouring Solvent Yellow 16 earns a trial circle in the same cell, so styrene-based engineering parts are not automatically closed to monoazo yellows as a class. And the crosses begin exactly where the 260 °C ceiling ends.

Product Class Heat Light PS SB ABS SAN PMMA PC
Solvent Yellow 14 Monoazo 260 °C 5–6 ● ● × ● ○ ×
Solvent Yellow 16 Monoazo 260 °C 4–6 ● ● ○ ● ○ ×
Solvent Yellow 33 Anthraquinone 290 °C 5–6 ● ● × ○ ○ ●
Solvent Yellow 56 Monoazo 230 °C 5–6 ● ○ × ○ × ×

Solid marks mean a direct fit, open circles mean run a trial first, and crosses mean the combination is not recommended. All four rows are measured values from our solvent dye product table, not brochure ranges, and the full sheet carries the same marks for oil and fat systems, paints and inks alongside eight resin columns.

Light fastness and the applications that follow

Rated 5–6 on the blue wool scale, Solvent Yellow 14 belongs indoors. Retail packaging, stationery compounds, transparent housewares: these hold their shade for years of shelf and office life without visible fade. Prolonged outdoor exposure is a different brief, and one caution applies before any fastness number is quoted. The rating is depth-sensitive, so the same dye scores higher in a deep shade than in a pale tint, which makes testing at the actual letdown ratio worth the day it costs.

The matrix also marks the dye suitable for oil and fat systems, paints and inks, and industry usage tracks those marks. Transparent PS parts, solvent-based inks, wood stains, shoe polish and waxes are the classic outlets for this chemistry, and several of them still move serious volume today.

From our CI-number catalog

Working from a catalog organized by CI number changes how you shortlist colorants. Our solvent dye table lists 72 CI-numbered varieties, each carrying measured heat stability, light fastness and a resin compatibility row, so Solvent Yellow 14 can be weighed against its alternatives in minutes. Each batch is tested before release, with retained samples kept for five years.

Questions buyers ask about Solvent Yellow 14

Is Solvent Yellow 14 the same dye as Sudan I?

Yes. Both names point to C.I. 12055, CAS 842-07-9. Sudan I carries food-safety restrictions in the EU and several other jurisdictions, so the dye is sold for industrial coloration only, from plastics and inks to oils and waxes, and food-contact formulations are out of scope.

Will it work in ABS or polycarbonate?

Not for ABS as this grade stands, since the matrix crosses it out, though the related Solvent Yellow 16 earns a trial circle there. Polycarbonate is a case for a swap rather than a trial: barrels run near 280–320 °C, past the 260 °C rating, and the anthraquinone Solvent Yellow 33 at 290 °C is the natural yellow alternative in the same catalog.

What loading should a transparent PS shade start at?

Transparent styrene shades commonly need between 0.01% and 0.1% dye in the final product, with concentrate recipes scaled from the target letdown ratio. Picking the right grade for that letdown is the harder half of the job, and our guide to selecting solvent dyes for plastic masterbatch walks through it heat window first.

Scroll to Top