Four Color Index numbers cover a large share of the yellow ink used across commercial printing: PY12, PY13, PY14 and PY17. All four are diarylide yellow pigments, the same disazo chemistry that has colored newspapers, magazines and packaging for decades. The grades differ in shade, strength and fastness, and those differences decide which press they belong on.

What Sets Diarylide Yellow Pigments Apart

Diarylide yellows are built by tetrazotizing 3,3′-dichlorobenzidine and coupling the result with two acetoacetanilide units. The finished molecule carries two azo chromophores, which is why a kilogram of diarylide yellow typically delivers more color strength than a comparable monoazo yellow at a similar or lower price. For an ink maker, that ratio of strength to cost is the whole argument.

The four grades here share that backbone. What separates them is the substitution on the coupler. PY12 offers a slightly reddish yellow and the lowest cost of the group. PY13 pulls greener and rates better against light. PY14 generally sits between the two in shade, and PY17 pairs PY13-level fastness with the best migration rating of the family, as the measured data below shows.

Site-Measured Fastness for the Four Grades

The values in this table come from the comparison data published for the diarylide grades in our organic pigments range, so all four numbers were recorded under the same test conditions rather than pieced together from different suppliers’ brochures.

Pigment Heat stability Light fastness Migration fastness (FS 0.1%)
Pigment Yellow 12 180 °C 3-4 2-3
Pigment Yellow 13 200 °C 6-7 3-4
Pigment Yellow 14 200 °C 5-6 2-3
Pigment Yellow 17 200 °C 6-7 5

Read row by row, the table tells a clean story. PY12 measures 180 °C heat stability with light fastness of 3-4, which reads as a floor rather than a flaw once the price is considered. PY13 and PY17 both double the light fastness rating to 6-7 at 200 °C, and PY17 adds a migration rating of 5, a full step up from every other grade listed. PY14 holds the middle ground at 5-6.

The same catalog data marks PY13, PY14 and PY17 as compatible with PE/PP, PVC and rubber, a reminder that these yellows also serve plastics alongside their main ink business.

Working with a specialized supplier: Ningbo Ultra Color Co., Ltd supplies diarylide yellows PY12, PY13, PY14 and PY17 alongside solvent dyes, inorganic and effect pigments and additives. Every batch is checked against REACH and RoHS requirements, and retention samples are kept for five years, so each shipment can be traced back to its own test record.

Matching Each Yellow to an Ink System

Coldset web offset is PY12 territory. Newspaper ink has long been formulated around it because newsprint lives for days, not seasons, so a 3-4 light fastness rating is acceptable while the strength-to-cost ratio is hard to beat. Coldset printing applies no oven heat, which keeps the 180 °C ceiling out of the conversation.

Heatset and packaging work moves up the table. Heatset webs commonly pass through dryers holding temperatures that sit comfortably inside the 200 °C stability of PY13, PY14 and PY17. In packaging gravure and flexographic inks, where a carton may face shop lighting for months, the 6-7 light fastness of PY13 and PY17 is usually the deciding line, and PY17’s migration rating of 5 matters wherever the print wraps food or cosmetics.

Two limits close the map. Metal decorating and foil coatings demand cure temperatures beyond what any grade in this family is measured to hold, which rules the diarylides out of that work. And because diarylide chemistry derives from dichlorobenzidine, food-contact ink regulations in many markets commonly exclude the class, so the intended market should be confirmed before specification.

Where the diarylide ceiling bites, benzimidazolone yellows take over. Our companion article on benzimidazolone yellow pigments for demanding systems sets PY151 at a site-measured 290 °C with light fastness 8 against PY12 at 180 °C and 3-4, which frames the price-for-fastness trade in two rows.

FAQ

Why does PY12 dominate newspaper ink if its light fastness is only 3-4?

Because the print life is short. A daily newspaper is read and recycled within days, so fading resistance barely enters the specification. What matters is color strength per unit cost, and PY12 measures 180 °C of heat stability, more than a coldset process ever needs, while delivering the economy that high-volume news ink demands.

Can PY13 replace PY12 one to one in an existing formula?

Not directly. PY13 is greener in shade and typically stronger in tint, so swapping it into a PY12 formula shifts the hue and usually overshoots the color target. Formulators commonly reduce the loading and rebalance the magenta component to bring the shade back in line.

Are diarylide yellow pigments allowed in food packaging inks?

Regulations vary by market, but food-contact applications commonly exclude diarylide pigments because of their dichlorobenzidine-derived structure, and the migration numbers above are not food-contact approvals. For prints that touch food directly, plan on other chemistries and confirm the compliance file for the target market before ordering.

Scroll to Top