Two chemistries, one transparent color

Metal complex solvent dyes and monoazo dyes compete for the same jobs. Both dissolve into a polymer melt and color it transparently, rather than scattering light the way a dispersed pigment does; the distinction is covered in the difference between solvent dyes and pigments. The gap between the two dye classes sits deeper, in the molecule itself. A monoazo dye carries one azo chromophore. A metal complex grade wraps that chromophore around a chromium or cobalt ion, and the chelate changes how the color behaves under heat and light. How much it changes depends on the hue.

That question is settled with measurements, not slogans. The solvent dye catalog publishes one suitability table for every grade, and on it nine rows are metal complex types while six are monoazo. Four of those rows, two yellows and two reds, carry most of the story.

The measured numbers side by side

Each catalog row lists heat stability, blue wool light fastness and a suitability mark for each resin. The four rows below read as follows.

Property (catalog-measured) Solvent Yellow 21 Solvent Yellow 14 Solvent Red 122 Solvent Red 195
Chemical class Metal complex Monoazo Metal complex Monoazo
Heat stability 290 °C 260 °C 230 °C 280–290 °C
Light fastness, blue wool scale 6–7 5–6 6–7 6–7
Oil and fat, paint, ink ○ ● ○ ● ● ● ● ● ● ● ○ ●
PS, SB ● ● ● ● ● ● ● ●
ABS, SAN × ● × ● ○ ○ ● ●
PMMA ○ ○ ○ ●
PC, PET × × × × × × ● ●
PA6 ● × × ×

Marks follow the catalog matrix: a filled circle means suitable, an open circle means conditional after evaluation in your own compound, a cross means not listed as suitable. Read down the ABS, PMMA and PC columns and the pattern splits by hue rather than by class.

Where the metal complex wins

In yellows, the chelate pays. Solvent Yellow 21, a metal complex grade, measures 290 °C of heat stability and 6–7 on the blue wool scale, against 260 °C and 5–6 for the monoazo Solvent Yellow 14. Thirty degrees of headroom, one light fastness point, and one mark the monoazo yellow cannot match: a solid circle in the PA6 column. The ordering holds at equal heat too. Solvent Yellow 79, metal complex at 260 °C, rates 5–6 in light where Solvent Yellow 16, monoazo at the same 260 °C, rates 4–6. Chelation commonly buys about one blue wool point in this hue family.

Where the monoazo grade answers back

Red and orange reverse the order. Solvent Red 122, a metal complex red, measures 230 °C with 6–7 light fastness but turns conditional beyond PS and styrene-butadiene. Solvent Red 195, a monoazo, holds 280–290 °C at the same 6–7 rating and carries solid marks through ABS, SAN, PMMA, PC and PET. Fifty to sixty degrees more heat headroom from the simpler molecule. Orange behaves the same way: Solvent Orange 105, a monoazo rated 280 °C and 6–7, outranks the metal complex Solvent Orange 54 at 250 °C across the resin columns. The class label alone would have bought the wrong dye in either hue.

Working with a specialized supplier

Ningbo Ultra Color supplies metal complex and monoazo solvent dyes alongside organic and inorganic pigments, effect pigments and additives. Every lot passes REACH SVHC and RoHS screening, and batch samples are retained for five years, so any measured value in this comparison can be traced back to the lot that shipped.

What the metal atom adds and what it costs

Three costs travel with the chelate. Price first: metal complex solvent dyes typically cost more per kilogram than comparable monoazo grades, because synthesis adds coordination and metal-recovery steps. Shade second: the coordinated metal commonly reads a touch duller, which matters most in bright yellows. Compliance third: chromium and cobalt content draws regulatory screening such as REACH SVHC and RoHS checks on every lot, a topic that deserves its own walkthrough rather than a footnote here. None of this makes the metal complex a poor buy. It makes the choice a measured trade: the one-point light gain and the PA6 mark in yellows, set against the 50 to 60 degrees of heat headroom the monoazo red holds.

Frequently asked questions

Are metal complex solvent dyes always more lightfast than monoazo grades?
No. Across the nine metal complex rows in the catalog, blue wool ratings run from 4–6 (Solvent Blue 70) and 5–6 (Solvent Red 49) up to 6–7, while the monoazo Solvent Red 195 also measures 6–7. The chelate commonly adds about a point within a hue family, as the yellow pairs above show, but it does not outrank every monoazo on the sheet.

Which class should I pick for polycarbonate, PET or nylon?
The measured table says the monoazo rows. Solvent Red 195 and Solvent Orange 105 carry solid marks in PC and PET, while the metal complex rows show crosses there. For PA6 the order flips: Solvent Yellow 21 is one of the few rows of any class with a solid PA6 mark.

Is choosing between classes the same method as comparing two single grades?
Yes. Reading heat stability, blue wool rating and resin marks row against row is the same measured-first walk taken in Solvent Red 24 vs Solvent Red 27; the chemical class is simply one more column in the decision.

Scroll to Top