What Thermoplastic Microspheres Are
In thermoplastic microspheres foaming, heat does the work. Each particle is a polymeric core-shell sphere, typically 10–50 µm across: a thermoplastic acrylonitrile-based shell wrapped around a core of volatile hydrocarbon. The beads arrive as a free-flowing white powder that blends into inks, pastes, and liquid compounds like any other fine additive.
Heat the spheres past the glass transition temperature of the shell and two things happen at once. The shell softens. The hydrocarbon inside gasifies, pressure builds, and each sphere inflates to tens of times its original volume, up to several hundred times in high-ratio grades. Because the gas stays sealed in the shell, every sphere remains a closed cell, which is why foamed films keep a smooth surface instead of turning spongy.
Commercial series cover different foaming temperatures and foaming ratios, so one chemistry serves both a low-temperature textile dryer and a high-temperature extrusion line. The additives catalog lists the foaming agent series alongside other processing aids.
Physical Expansion Versus Chemical Decomposition
Classic chemical blowing agents, azo types such as azodicarbonamide (AC), generate gas by decomposition. Near 160–200 °C, a commonly quoted range for neat AC and lower with activators, the molecule breaks apart and releases nitrogen and other gases into the melt, leaving solid residues behind. Microspheres skip that step. The blowing gas is already inside each particle, so nothing decomposes, no residue forms, and cells stay closed at full expansion.
The table sums up the practical differences. Temperature values are industry-typical ranges, not single measured values; confirm against the data sheet for the grade at hand.
| Property | Thermoplastic microspheres | Azo (AC) blowing agent |
|---|---|---|
| Gas source | Alkane sealed inside each shell | Decomposition of AC, releasing N2 and other gases |
| Typical activation | about 80–200 °C, grade-dependent | about 160–200 °C, lower with activators |
| Residue | none | solid decomposition residues |
| Cell structure | closed, intact shells | open or mixed cells |
| Neat color | white powder | yellow to orange powder |
Raised Effects in Screen Printing Inks
Puff and 3D screen inks put the expansion on display. The paste carries a few percent of microspheres, printed through a coarse mesh to lay down a wet film a few tenths of a millimeter thick. One pass through a dryer, commonly at 120–160 °C, and the printed stripe rises into a ridge several times its original height. Braille dots, raised wallpaper patterns, children’s drawing inks, and high-build textile prints all use this thick-film route.
Printers like the control it gives. Below the onset temperature the ink handles normally, so fine outlines can be gelled first and raised in a second heating step. Overheating shows up fast as collapsed cells and a wrinkled ridge, which makes the process window easy to map on any press.
Coatings, Rubber, and Lightweight Compounds
In coatings the same spheres build function rather than looks. Anti-slip and flocking coatings for carpet backings, cardboard, and synthetic fibers rely on a textured micro-foam surface for grip. Leather coatings and automobile interior trim gain a soft touch; chassis coatings add thermal and acoustic insulation at low weight; textile and paper finishes gain bulk without losing opacity.
Rubber and plastics compounders use the spheres to cut density. PVC slipper soles, foam rubber, wine bottle stoppers, porous ceramics, and lightweight clay all foam with them, and density reductions of 20–50% are commonly quoted for filled thermoplastics. Loadings stay modest, often under 5%, because each sphere already expands by tens of times. Performance grades also go into artificial marble, cable compounds, and adhesives, where controlled expansion improves dimensional stability rather than just cutting weight.
Working with a specialized supplier helps when a grade must fit a narrow process window. Ningbo Ultra Color Co., Ltd supplies solvent dyes, organic and inorganic pigments, effect pigments, and additives including foaming agents, with REACH and RoHS compliance checks on every batch and retained samples kept for five years.
Choosing a Grade for Your Process
Start from the process temperature, then pick the expansion window. A grade that blows 30–50 °C below your drying or extrusion temperature gives fast, complete expansion; a grade that blows above it gives shelf stability but stays flat. Particle size matters next: 10–50 µm spheres pass fine mesh counts and lie smooth in thin coatings. Check solvent and plasticizer resistance too, since aggressive carriers in the ink or melt can soften shells early.
Microspheres also share formulations with other additives. Stabilizer systems built on UV absorbers and HALS must survive the same heat history, and whites brightened with optical brighteners for plastics can shift shade after foaming, so a small trial batch settles the interaction before a production run.
Frequently Asked Questions
What temperature do thermoplastic microspheres expand at?
It depends on the grade. Commercial series span roughly 80–200 °C in industry-common terms, with low-temperature types for textile drying and high-temperature types for extrusion or overbake conditions. The exact onset and completion temperatures sit on the data sheet for each grade.
How many times do thermoplastic microspheres expand?
The volume of a single sphere grows by tens of times, and up to several hundred times in high-ratio grades. Bulk density in a compound drops far less, since expansion is limited by the surrounding matrix and the loading level.
Are thermoplastic microspheres the same as AC blowing agents?
No. Microspheres expand physically, with gas sealed inside each shell; AC agents decompose at processing temperature and release gas from the reaction itself. The physical route leaves no residue and keeps cells closed, which suits fine surface finishes, while azo routes stay common where high gas yield per gram matters.
A short lab trial on your own line settles the rest: one heating ramp shows the onset, the rise, and the collapse point of any candidate grade.


