Pick any colored plastic part and its colorant belongs to one of two families. Organic pigments are carbon-based synthetic molecules; inorganic pigments are minerals and metal compounds. The choice between them shifts heat stability, weathering, dosage and compliance paperwork at the same time. Neither family wins outright. This guide compares both on the five properties that decide most projects, then maps the decision onto common resins and end uses.

Two Chemistries Behind Every Colorant

Organic pigments cover azo yellows and reds, phthalocyanine blues and greens, quinacridones, DPP reds and oranges, perylenes and dioxazine violet. Inorganic pigments are oxides and elements: iron oxides in six shades, titanium dioxide, carbon black, plus the legacy lead chromate and cadmium grades. On our own shelf the split is concrete. The organic pigment catalog carries 62 varieties with measured heat stability from 180 °C to 300 °C, while the inorganic pigment line is built around carbon black, titanium dioxide and an iron oxide range specified for high heat resistance, high tinting strength and outstanding dispersibility.

Particle behavior explains most performance gaps. Organic pigment particles are commonly sub-micron, so a small dose tints hard and films stay transparent. Inorganic oxide particles are larger and denser, with iron oxides commonly near a specific gravity of 5 against roughly 1.5 for organics, so they scatter light and hide what sits underneath. Carbon black is the outlier, an inorganic pigment with the strongest tinting power in industrial use. If the broader colorant-class question is still open, the pigment vs dye overview covers that boundary separately.

Where the Numbers Diverge

The table sets the families side by side. Organic values come from the measured 62-variety table on the catalog page. Inorganic values are industry-typical, because oxide performance swings with grade and surface treatment.

Property Organic pigments (catalog measured) Inorganic pigments (industry typical)
Heat resistance 180–300 °C across 62 varieties; PY12 at 180 °C, DPP PO73 and quinacridone PR122 at 300 °C Iron oxides commonly above 800 °C; TiO2 and carbon black essentially unaffected at polymer melt temperatures
Light fastness Blue wool 3–8 by grade; quinacridone, dioxazine and DPP types reach 8 Iron oxides typically rate 8; TiO2 grades are rated excellent
Tinting and opacity High chroma and tinting strength, transparent films High hiding and opacity; the catalog iron oxides are also specified for high tinting strength
Price band Moderate to high; classical azos such as the PY12 family are the economical end Iron oxides usually the lowest cost per kg; TiO2 rides commodity cycles
Toxicity and environment Carbon-based, though some types are metal salts, such as barium salt PR48:1 and nickel azo PY150 Legacy lead chromate and cadmium grades restricted under RoHS and REACH; modern iron oxides are low concern

Two footnotes matter. The organic column hides a wide internal spread, which is why reading heat stability numbers correctly comes before locking a grade. And the old line that inorganic equals toxic is out of date: the restricted heavy-metal types are a shrinking niche, while iron oxides rank among the cleanest pigments on the market.

How to Choose by Application

Match the pigment to the harshest condition the part will face, and melt temperature usually comes first. Engineering plastics such as PA6, PET and PC process at 260–300 °C, which rules out most low-cost azos. The catalog table shows nickel azo PY150 holding 300 °C with approval marks across all three of those resin columns, and PR122 and PB15:1 also rated at 300 °C. Olefins and PS run cooler, near 200 °C, where a PY13 at 200 °C with light fastness 6–7 already covers many housings.

Outdoor exposure is the second filter. PVC profiles, fencing and roofing lean on iron oxide reds, yellows and browns, which pair typical blue wool 8 ratings with the lowest cost per service year; the iron oxide color guide breaks down the shade options. When a job needs a brilliant signal red or violet that still weathers, quinacridone PR122 at light fastness 8 or DPP PR254 at 300 °C and grade 8 does work no oxide can match, at a price premium.

Regulatory scope comes third. Toys sold in Europe must meet EN 71-3 migration limits, which pushes formulators toward iron oxides and tested organic grades; the EN 71-3 colorant guide lists workable chemistries. In inks, transparent organics such as the diarylide yellows dominate process color, while TiO2 supplies the white hiding layer. Many formulations blend both families, and a white base tinted with organic pigment is the standard pastel route.

From our catalog desk: Ningbo Ultra Color supplies solvent dyes, organic and inorganic pigments, effect pigments and additives, with SVHC updates under REACH and RoHS substance checks run on a full test set. Every batch sample is kept for five years, so a shade query raised months later still traces back to the original lot.

Which Pigment Family Fits Your Project?

Are organic pigments free of heavy metals?

Not always. PR48:1 is an organic BONA red manufactured as a barium salt, measured at 240 °C heat stability in the catalog, and nickel azo PY150 carries nickel in its complex. Organic describes the carbon-based chromophore, not the metal content, so the safety data sheet stays the final word.

Which family is cheaper?

Per kilogram, iron oxides usually sit at the bottom of the price band, and classical azos such as PY12 sit just above. Per colored part, strong organic tinting closes much of the gap, since loadings below 0.5% are common for high-chroma shades in commodity resins.

Can the two families be combined in one formulation?

Yes, and it is routine. TiO2 white tinted with organic pigment is the standard pastel system, and iron oxide browns are often deepened with a touch of carbon black. Size the processing window to the weakest component, which is usually the organic grade.

Scroll to Top